Paxton PROXIMITY marine reader Manuel d'utilisateur télécharger pdf

25/01/2010

Fitting

Fix the backplate to the wall with the stainless steel screws provided in the tting kit. The small slot in the plate

edge should be positioned at the bottom.

Where the unit is to be tted to a smooth surface, bulkhead, etc. a gasket is supplied to provide a weatherproof

seal between the backplate and the mounting surface. (The unit has its own integral seal)

Locate the unit in the keyhole slots provided in the backplate. Make sure that the locking pin is close to the slot in

the edge of the backplate. Rotate the unit clockwise until the locking pin engages in the slot.

To remove the unit, insert a small screwdriver into the cut out provided and use it to lift the locking pin.

The unit can then be rotated anticlockwise to release it from the backplate.

Ins-30045 PROXIMITY marine reader

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Paxton

1 2 3

25/01/2010FittingFix the backplate to the wall with the stainless steel screws provided in the tting kit. The small slot in the plate edge should be

Readers mounted togetherbetween readers300mmMounted on metal surfaceSuitabilitySecurity-sensitive doorsWet environmentsCable extensionsReaders can be

The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596-35 °C +70 °C IPX78V DC 14V DC 220 mA

Pas de commentaire

Paxton PROXIMITY marine reader Manuel d'utilisateur