1. Screws and wall plugs are provided in a parts kit.
With reference to the diagrams, determine where
the top, central mounting hole is required and drill a
hole suitable for a No 8 wall plug.
2. Tap in one of the wall plugs.
3. Put in one of the long screws, leaving a suitable
gap to the wall surface in order to slot the cabinet
over it.
4. Mark the hole positions for the lower 2 screws.
5. Remove the cabinet and drill the additional holes.
6. Tap in the 2 wall plugs and hang the cabinet back
onto the top screw.
7. Secure the cabinet with the 2 lower screws.
8. Tighten the top screw.
Mounting
A detachable gure 8 power cable is provided
with the unit. This is pre-stripped at one end for
connection to a fused spur.
Anchor points are supplied inside the case to secure
the incoming 110V supply cable. (cable tidy/ties are
provided) There are also 'knock-outs' in the case to
allow convenient access for the cable.
Use the supplied gland or grommet to protect the
110V supply cable when passing it through any
holes in the cabinet.
AC Input Connection
The power supply is double insulated and
requires no additional earth connection.
NOTE: The PSU's battery function will not
work until this unit has rst been connected to
the mains supply. It is the loss of this supply
that switches the unit to battery power.
This product is not suitable for retail sale. All
warranties are invalid if this product is not
installed by a competent person.
Metal Cabinet
Plastic Cabinet
NOTE: A Net2 nano ACU or a Hands free interface cannot be installed in the Metal cabinet
as this would block the RF signal used for the Net2Air wireless technology.
9
1
/4 in
7
3
/4 in
4
5
/8 in
3
/4 in
12
5
/8 in
11
3
/16 in
3
7
/8 in3
7
/8 in
9
1
/8 in
2
11
/16 in
4
5
/8 in
1 in
12
5
/8 in
10
1
/2 in
2
11
/16 in
5
3
/8 in
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels